NEW XCMG Rough Terrain Crane XCR70 70t, Full-extend boom+jib 45.3 m

XCR70 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc. XCMG G1 generation rough terrain crane XCR70 is designed with four innovative technologies integrated to create an ultrahigh performance ,green and energy saving efficient and intelligent lifting equipment. XCR70 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc

Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.
Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.
The boom should be extended according to the telescoping code shown by digits, which means the percentage of boom sections extended.
Low speed large torque optimal transmission chain, high power performance, max. travel speed of 40 km/h and max. grade ability of
70% contribute to manoeuver ability and quick job site transfer.







Showroom Location
Egypt, Canada, United Kingdom, United States, Italy, France, Germany, Viet Nam, Philippines, Brazil, Peru, Saudi Arabia, Indonesia, Pakistan, Mexico, Russia, Spain, Thailand, Morocco, Kenya, Argentina, South Korea, Chile, UAE, Colombia, Algeria, Sri Lanka, Romania, Bangladesh, South Africa, Kazakhstan, Kyrgyzstan, Nigeria, Uzbekistan, Tajikistan, Malaysia, Australia

FEATURE of the XCMG Rough Terrain Crane XCR70
Superb lifting performance
5-section boom of 45m.
Two jib sections of 9.2m-16m , with 0, 15 and 30 deg. jib offset angles.
Three boom telescoping modes, wider working radius and better application adaptability.
High performance
5-section boom of 45 m is the longest in the industry, the length of boom and jib can reach 61 m after jib is installed.
Large displacement dual-variable plunger pump with confluent main valve adopting XCMG patented technology integrated, leads to improvement by 13% in operation efficiency.
Large power engine + low speed large torque transmission system with hydraulic torque converter; acceleration performance is improved by 10%, the max. travel speed is 40 km/h and the max. grade ability is 70%.
Green and energy-saving
New energy-saving hydraulic system with double-variable pump combined with a valve-controlled load-sensing system. The fuel consumption under different working conditions can be reduced by 10%~15%.
ECO energy-saving control, fuel consumption under different working conditions can
be reduced by 5%-9%.
Torque converter with lockup function, low speed large torque, high speed and high efficiency, and driving fuel consumption is reduced by 20%.
Science and technology intelligence
Dedicated driving safety active protection technology is adopted to realize classified management, such as automatic warning,gear and speed limit, automatic brake according to different fault categories, in order to improve the active safety of the driving vehicle.
Intelligent boom system can standardize the operation of the users and improve the operation safety; it provides users with the most effective lifting plan, and improves the working efficiency.
* Fault self-diagnosis system is adopted; there are 285 control nodes; automatic inspection
and automatic diagnosis can be shown in real-time on the display.

The specification of the XCMG Rough Terrain Crane XCR70

---

Warranty terms
12 months since arrival at destination port

---

Materials and specifications are subject to change without notice.
Featured machines in photos may include additional equipment. The specification do not necessarily show the standard version of the machine.
Ask our manager for available options.

---

09.00 - 17.00 hrs Monday - Friday
Not available on Saturday's or Sunday's