Description Fotma FM1304 FARM Tractor 4WD
Are you still wasting time looking for Fotma Tractor suppliers?
Do you still worry about product quality assurance?
Are you late in deciding to buy because of insufficient budget?
If you have these worries, stay and see.
NEW Fotma FM1304 FARM Tractor 4WD
Fitted with YTO/Yuchai 4 cylinder diesel engine,
95.6KW, hydraulic steering, F16+R8 creeper gear or
F8+R8 shuttle shift, JPV dual stage clutch, 3-point
linkage, agri-tyres 11.2-24/16.9-34, dual speed PTO
shaft 540/1000rpm
1. Adopt YTO/Yuchai diesel engine, good reliability, large reserves of torque, low fuel consumption, high economic efficiency;
2. Double-function clutch, 13 inches, high transmission capacity, reliable, comfortable manipulation;
3. Gearbox using 4 × (3 +1) engaging sleeve gearshift , there are 12forward gears, 4 reverse gears, reasonable match between the gears, and have high efficiency;
4. Independent power take off device, smooth transmission, large capacity;
5. Using an independent circuit of hydraulic steering control system, manipulating flexible, reliable, and save energy;
6. Adopt hydrostatic disc-type brakes, a large braking torque, the braking effect is good;
7. Adopt high pressure type lifting device, reliable, easy maintenance, multi-hydraulic output can be optioned;
8. Final transmission adopts planetary gear mechanism, compact structure, large reduction ratio;
9. New streamlined appearance, generous, modern, fashion;
Loading 3 units in a 40HC container
Terms of Payment By T/T 30% in advance, 70% before shipment
Delivery Time In about 40 days after deposit
Warranty terms 12 months since arrival at destination port
OPTIONS Front Ballast
Rear Ballast
Luxury cabin with A/C
General drivers cabin
Double valve device
ROPS & Canopy
Swing bar
13.6-24 front tire
18.4-30 rear tire
The specification of the Fotma FM1304 FARM Tractor 4WD
Drive type 4x4
--------------------------------------------------------
Engine model LR6M5
--------------------------------------------------------
Aspiration way Natural aspiration
--------------------------------------------------------
Engine power 95.6KW
--------------------------------------------------------
Displacement(L) 7.7
--------------------------------------------------------
Starter model QDJ1408GM
--------------------------------------------------------
Cooling type Water cooled
--------------------------------------------------------
Rated speed (r/min) 2300
--------------------------------------------------------
Diameter×Stroke 110×135
--------------------------------------------------------
Fuel tank capacity(L) 150
--------------------------------------------------------
Transmission
--------------------------------------------------------
Clutch Dry, dual-stage type
--------------------------------------------------------
Gearshift 8F+8R
--------------------------------------------------------
Gearbox shifting way Joggle cover
--------------------------------------------------------
Steering, brake and muffler
--------------------------------------------------------
Steering gear type Hydraulic steering
--------------------------------------------------------
Steering gear Cycloid rotation valve type
--------------------------------------------------------
Brake model Wet, disc
--------------------------------------------------------
Muffler dimension(Diameter×Length) φ290×135×600
--------------------------------------------------------
Walking device
--------------------------------------------------------
Frame type Frameless
--------------------------------------------------------
Tyre size( front/rear) 11.2-24/16.9-34
--------------------------------------------------------
Pressure( front/rear) 118-137/118-137
--------------------------------------------------------
Rim material 08AL
--------------------------------------------------------
Lifter type Semi-detached model
--------------------------------------------------------
Suspension model Rear, three-point linkages
--------------------------------------------------------
Suspension category II
--------------------------------------------------------
Adjusting control Position control, float control
--------------------------------------------------------
Hydraulic pump type Gear pump CBN-E325
--------------------------------------------------------
Hydraulic valve 2 sets
--------------------------------------------------------
P.T.O. type 1 type, rear
--------------------------------------------------------
Spline no. of P.T.O. 6
--------------------------------------------------------
Diameter of spline 35mm
--------------------------------------------------------
RPM 540/1000 or 760/1000 r/min
--------------------------------------------------------
Max.lifting force 17.64kN
--------------------------------------------------------
Technical parameter
--------------------------------------------------------
Dimension LxWxH (mm) 4593x2240x2810
--------------------------------------------------------
Wheel base(mm) 2195
--------------------------------------------------------
Wheel tread (mm)
--------------------------------------------------------
Front 1610-1950( usual 1610)
--------------------------------------------------------
Rear 1620-2020( ex-work 1620)
--------------------------------------------------------
Min. ground clearance(mm) 379
--------------------------------------------------------
Min. operational weight 3800kg
--------------------------------------------------------
Front/rear axle weight 1550/2250kg
--------------------------------------------------------
Max. ballast weight (front/rear) 240/540kg
--------------------------------------------------------
Gear no. 16/8 or 8/8
--------------------------------------------------------
Theoretical speed of gears
--------------------------------------------------------
Forward Forward 0.46,0.72,1.15,1.61,2.01,2.31,3.12,3.60,5.00,5.7 6,6.97,8.03,10.04,15.61,24.98,34.85
--------------------------------------------------------
Reverse 0.62, 0.97, 1.55, 2.16,3.10,4.83,7.73,10.78
--------------------------------------------------------
Starting way Electric start
--------------------------------------------------------
P.T.O. power 82KW
--------------------------------------------------------
Max.traction force 21.70kN